Hireko Golf Technical Director Demonstrates A Quick And Easy Way To Swingweight Taper Tip Steel Shafts
Those lead tip pins you bought for steel iron shafts aren’t going to fit inside a 0.355” taper tip steel shaft – no way, no how! Those were developed for 0.370” parallel tip shafts only. Sure, you can use tungsten powder, a cork and a ram rod but there is one other solution you might not have thought of to swingweight 0.355” taper tip steel iron shafts.
OK, I’ll admit our labeling of certain products could be a little better. One of those examples is for the lead tip pins for steel wood shafts. If you are asking “Who still uses steel wood shafts anymore?” all I can say is they come in might handy for 0.355” taper tip steel iron shafts too. These tip pins will fit the inside of the taper tipped steel shaft rather loosely, but the head on the pin will prevent it from going up and down the shaft as it will get trapped between the tip of the shaft and the bottom of the hosel. Just make sure not to pound the head onto the shaft too much during installation otherwise you could break off the head of the tip pin.
To take up the slack, you can take a 7/8” long strip of ½” wide lead tape and wrap it around the stem. You could always use masking tape as well. In either case epoxy will fill up the void, eliminate any rattling and most importantly increase the swingweight to your desired setting.
VIEW VIDEO BLOG BELOW ON HOW TO SWINGWEIGHT TAPER TIP STEEL SHAFTS WITH TIP PINS!
An inch longer than Performance Plus, yet with the same reduced taper, the Lamkin Wedge Grip supports choking down on your club for greater control of shots around the green. The “buttons” on the Wedge Grip, located 1.5 inches apart, are designed to facilitate a more precise and repeatable hand placement enabling a confident and guess-work free swing.
Now Only $4.99 Each! (Reg. $9.99 each)
KBS C-Taper Lite: MID-HIGH LAUNCH. SPIN CONTROL. PURE PERFORMANCE.
The C-TAPER LITE iron shaft incorporates proven KBS performance benefits – piercing trajectory and smooth feel – in a lighter weight design. The firm tip and stiff butt sections produce a mid-high trajectory and controlled spin. Featuring a constant taper design and proportionate increase in wall thickness, the KBS C-TAPER LITE maximizes energy transfer for maximum distance. As a result, an average of 5 yards increased distance was seen during robot testing. The C-TAPER LITE come with the signature KBS brushed satin finish.
New Golf Trainings Available 9/13 To Help Lower Your Scores!
Morodz MVP myPutt Putting Target
Improve all aspects of your putting indoors or on the practice green with the myPutt from MVP Sports!
• Practice anywhere with a superior putting target
• Anchor myPutt to the green with tee
• Enhances the use of other practice aids
• myPutt represents “The True Target” of the hole
• The myPutt is 1/2 the diameter of a normal cup.
Morodz MVP Universal Video Holster With 4 Part Collapsible Rod
The MVP Sport Universal Video Holster is a truly effective way to capture your swing on video using virtually any smartphone and even some action cameras like GoPro!
• Easily snaps onto MorodZ golf alignment rods (or other 5/16″ sticks)
• Adjustable design accepts phones between 2″ – 3 3/8″ wide
• Great for practice on the driving range and putting green
• Shoot video to review instantly on your phone, upload to the internet, email, or view on your computer screen
• No apps required!
• Includes a 4 part collapsible rod
Dynacraft Prophet ICT Fairway Component Clubheads Now Only $6.99 Each! That’s 77% Off!
For those of you who have the Dynacraft ICT drivers and have been scouring the internet for spare adapters, I have some good news. We are running a deep, deep, deep discount on the Dynacraft Prophet ICT fairway woods. Each one of these fairways woods comes with an ICT adapter that fits the drivers too. The giveaway prices we have these fairways for are less than what the ICT adapters cost brand new. Use the adapter and scrap the head if you like. Gobble them up before they are gone.