The Acer XK series will be our most versatile line to date allowing true custom XK Hybridfitting.

Our newest clubhead arrivals will be the exciting Acer XK drivers, fairways and hybrids to complement the already popular XK irons that debuted in September. The hybrids are based on most popular hybrid platform in our line, but we added a few new design elements to further improve upon the performance.

There are two hidden elements which enhance the design so you play better. The Acer XK hybrids feature our exclusive Variable Crown Technology (VCT). The crowns are cast as little as 0.5mm thick (that’s equivalent to 5 sheets of paper) allowing all the unwanted weight to be repositioned deep within the head.

VCT 1Next, a variable face thickness was selected. This is where the wall thickness around the perimeter of the face is much thinner than the center to create a more re-active face. This helps to provide a very crisp sound at impact that may only be experienced in higher end products on the market.

Assembly lengths were selected to be direct replacements for the same numbered and loftedVCT2 long irons to provide easy to predict yardages. These clubs can be matched with hybrid-specific shafts or any 0.370” parallel tip iron shaft. Combining the internal weighting, wider base and high moment of inertia will make these by far more forgiving than a traditional iron.

The Acer XK hybrids will be available in both right and left-handed in #3 (19°), #4 (22°) and #5 (25°) options. If you are serious about your game, then these can be a vital step in helping you lower your score and achieve your goals for the golfing season.

Buy Acer XK Hybrid Components for $17.95 each.
Buy Acer XK Hybrid Custom Assembled for $44.95 each.

13 Comments on Introducing The New Acer XK Hybrid Series

  1. Mr. R.N.PRY says:

    This just might be the best golf web site out there. Keep up the great work! Rp

  2. Brian says:

    Got any face-height data?

  3. george thomas says:

    how do I order new acer xk driver and hybirds there are announced but the do not come up on the website. The last e-mail said that the driver was avaiable on December 23.

  4. Jeff Summitt says:

    George:

    We have been extremely busy putting the final touches on our 2009 catalog and haven’t had the resources to update the website just yet. In the meantime if you wish to order, please call the sales line at 800-367-8912. The RH 10.5* driver and the RH 10.5* Draw (Offset) models are in stock, with some of the other lofts available near month’s end.

  5. Jeff Summitt says:

    Brian:

    The face heights are 34mm.

  6. LENNY says:

    I TRIED TO ORDER A CLOSEOUT DRIVER BUT WHEN ADD TO CART IT WOULD NOT GO TO CHECK OUT .I CHECKED 1 CLUB ??????????

  7. Jeff Summitt says:

    Lenny:

    Since I don’t which model it was to troubleshoot the problem, please call sales at 800-367-8912 to order the club or at least find out the status to see if it is still available.

  8. Steve says:

    What is the face progression on these xk hybrid heads? It’s hard to tell from the pictures, but there appears to be very little onset. This XK line really looks like a winner top-to-bottom.

    Thanks.

  9. Jeff Summitt says:

    Steve:

    The #3 hybrid has an onset of 5.5mm.

  10. Jack Sullivan says:

    Do you have any hybrids with cup face technology (or is this for drivers only)? Thx. Great website !

  11. Jeff Summitt says:

    Jack:

    At this time, the cup face is found only in the XK drivers, Dynacraft Avatar drivers in our closeout section and the Power Play Caiman Raw Power 3 wood.

  12. Matt L. says:

    How do the new XK hybrids compare to the Caiman hybrids?

  13. Jeff Summitt says:

    Matt:

    While the XK hybrids do not have a maraging steel face they do have the more active variable thickness stainless steel face. The biggest difference however is in the hosel location. The XK has a semi-offset hosel and may provide more help to those that may push or fade the ball hit the ball slightly straighter.

Leave a Reply