Download For FREE! The New 2008 Shaft Fitting Addendum!

For the past 16 years the annual Shaft Fitting Addendum has been the definitive guide on shafts for clubmakers worldwide.Download New Catalog Ad

If you are a golf clubfitter or simply curious and want to know more about golf shafts or how different golf shafts compared to one another, then the 2008 Shaft Fitting Addendum is a must have.

For those that are not already familiar with the Shaft Fitting Addendum, the first thing you will find out is not all R-flex shafts are created equal – that is in terms of flex, torque, bend point, etc. as every manufacturer are their own standard. In reality, there are no industry standards for shafts and the reason why this book serves as a valuable guide. Consistency is the key to this text as each of the approximately 3000 shafts and over 50,000 measurements has been tested by one individual using the same set of procedures and equipment for the past 19 years.

What Type of Information Will You Find?

There are 19 published specifications listed for each shaft that include:

Flex, Uncut Shaft Weight, Tip Diameter, Butt Diameter, Uncut Shaft Balance Point, Cut Shaft Balance Point, Completed Club Balance Point, Total Assembled Club Weight, Head Weight, Grip Weight, Cut Shaft Weight, Completed Club Frequency, Butt Deflection, Tip Deflection, T/B Ratio, Cut Shaft Torque, Raw Shaft Torque, Club Length (and wood bore type) and DSFI (Dynamic Shaft Fitting Index) Rating

In Chapter 1, you will find an explanation what each of these parameters mean and how they are measured. All of this information provides insight into how each shaft is unique. For example, what is the real difference between the Aldila NV and NVS Hybrid in an R-flex? Well now you can find out by looking at several key specifications as shown in the table below.

Shaft Fitting Addendum

Each shaft is similar in Cut Shaft Weight, Frequency, Butt Deflection and Cut Torque. Where the big difference lies is in the Tip Stiffness measurement with the Aldila NVS having a lower deflection reading. This results into a much softer tip section which will assist in hitting the ball higher.

In another example, we can compare shafts from the same or even different manufacturers that are of approximately the same overall stiffness and weight. In this case the Grafalloy ProLaunch Blue, ProLaunch Platinum and New Image Red Image Graphite are all mid-50g shafts of similar frequencies and stiffness index (see chart below).

Shaft Fitting Addendum 2

Let’s say you like the ProLaunch Blue 55, but are looking for another shaft that might be similarSpring Flyer Download but may launch the ball higher because the head you had not quite enough loft. The ProLaunch Platinum or the New Image Red Graphite may be both excellent choices. The difference being the New Image has a stiffer butt section but weakest tip section to create a higher T/B Ratio and may launch the ball the highest. The ProLaunch Platinum has a lower torque measurement and subsequently be able to launch the ball higher than the ProLaunch Blue, but with less spin.

Nowhere will you find so much information on each shaft in such detail. The best news is all this information is available for free who wish to download it.

How Do I Use the Information?

While offering all of this data is great, but being able to take the information and apply it intoLM your everyday fitting is another. This is why we established the Dynamic Shaft Fitting Index (or DSFI for short). The DSFI takes the Completed Club Frequency, Butt Deflection, Tip Deflection, Cut Shaft Torque, Raw Shaft and Club Length and puts it into a complex algorithm to put a number on stiffness. No longer do you need to rely solely on the generic flex designations by the manufacturers, but you can also relate it to the clubhead speed or #5-iron distance the golfer possess and be able to make appropriate shaft selections.

Swing speed is only a starting point – certain golfers will use different flexes based on their tempo and length of their swing rather just swing speed. The 2008 Shaft Fitting Addendum can help you understand these issues. In addition, club fitters or even ordinary golfers can look for suitable replacement shafts that may not exist anymore by looking through the archived shafts (Chapters 3 and 4). Matching shafts of similar cut weight, frequency, cut torque, tip and butt deflections will help you find that one shaft you owned previously that they liked so dearly.

If you are looking to advance your knowledge on the ever-confusing world of shafts, take this opportunity to download the 2008 Shaft Fitting Addendum. This is a companion piece to one of the best books written about shafts called the Modern Guide to Shaft Fitting and also available for free. This is just another example of how Hireko is helping out clubmakers, club fitters and fellow golfers alike by providing you with such indispensable information so you can make more well-informed choices when it comes to purchasing new equipment.

Download For Free The 2008 Shaft Fitting Addendum.
Download For Free The Modern Guide to Shaft Fitting.


  1. Ray Schuster says:

    Hi, I have been following the “Shaft Fitting Addendum” for a few years now and have found it to be extremely informative and useful. I can not, however, find a DSFI rating for the Royal Precision Microlite 80 Iron shaft in either R or S flex. Is there a rating you can pass along for that shaft? If so I would greatly appreciate it and thanks in advance.

  2. Jeff Summitt says:


    This was never a shaft that was tested or submitted by the manufacturer for us to test. I do not believe it is even a current model anymore as it was discontinued at the beginning of this calendar year.

  3. John Nichols says:

    I and the members of the golf forum appreciate all the time and effort it took to get this data and turn it into something we can understand. It answers so many questions about shafts for us. Thank you.

Leave a Reply

Your email address will not be published. Required fields are marked *