Comments on: Clubheads: Material Differences http://blog.hirekogolf.com/2007/04/19/clubheads-material-differences/ Professional Golf Equipment at Down to Earth Prices! Thu, 19 Nov 2009 21:08:46 -0700 http://wordpress.org/?v=2.8.2 hourly 1 By: Jeff Summitt http://blog.hirekogolf.com/2007/04/19/clubheads-material-differences/comment-page-1/#comment-37 Jeff Summitt Wed, 18 Jul 2007 18:07:22 +0000 http://blog.hirekogolf.com/?page_id=36#comment-37 Mathew: A cracking sound is usually a result of an insufficient epoxy bond. While it may hold, the epoxy may not be around the entire 360 degree circumference of the shaft. Your best bet is to heat up the head, pull the shaft, clean the tip of the shaft and the interior of the hosel. Afterwhich, re-epoxy the parts again. This should fix the problem. Sincerely, Jeff Summitt Mathew:

A cracking sound is usually a result of an insufficient epoxy bond. While it may hold, the epoxy may not be around the entire 360 degree circumference of the shaft. Your best bet is to heat up the head, pull the shaft, clean the tip of the shaft and the interior of the hosel. Afterwhich, re-epoxy the parts again. This should fix the problem.

Sincerely,

Jeff Summitt

]]> By: Matthew Heim http://blog.hirekogolf.com/2007/04/19/clubheads-material-differences/comment-page-1/#comment-36 Matthew Heim Wed, 18 Jul 2007 17:37:12 +0000 http://blog.hirekogolf.com/?page_id=36#comment-36 Not sure if this is the right place for this question or not... I have an Oxygen Type S driver head and the fairway heads assembled on True Temper TTLite shafts. Great golf clubs for me. I have another Nike clone driver head on a True Temper TTLite shaft. The odd thing is that the both driver heads exhibit a "creaking" sound when I hold the head and wiggle the shaft around. I do not get this with the fairway woods. The glue joint is made with the two part epoxy for glof clubs from Golfsmith. Nothing is coming loose, wither. I am assuming that this is coming from the difference in the stiffnesses of the Ti head and the stainless shafts. I would appreciate your insight on this. Not sure if this is the right place for this question or not…
I have an Oxygen Type S driver head and the fairway heads assembled on True Temper TTLite shafts. Great golf clubs for me. I have another Nike clone driver head on a True Temper TTLite shaft. The odd thing is that the both driver heads exhibit a “creaking” sound when I hold the head and wiggle the shaft around. I do not get this with the fairway woods. The glue joint is made with the two part epoxy for glof clubs from Golfsmith. Nothing is coming loose, wither. I am assuming that this is coming from the difference in the stiffnesses of the Ti head and the stainless shafts. I would appreciate your insight on this.

]]>